365体育开户

13823585415
Ranch
CONTACT US CONTACT US

Shenzhen Geruid Logistics Equipment Co., Ltd.

Address: 1 / F, Building A, No. 11 Longshan Industrial Zone, Nanwan Street, Longgang District, Shenzhen

Contact: Mr. Zhang

Mobile phone: 13823585415

QQ: 2650623930

Phone: 0755-85286885

Fax: 0755-81479190

E-mail: lion.zhang@xshizhuan.com

Website: xshizhuan.com

WeChat: Scan Code

company news

Position: Home > News > Company News >
How to do the daily maintenance of small dust collector?
Publisher: admin Release date: 2019-10-30 17:56:36
How to do the daily maintenance of small dust collector?
When the small dust collector is working normally, the ash discharge device cannot stop working, otherwise, the ash bucket will soon be full of dust and overflow into the bag chamber, forcing the dust collector to stop working.
The oil-water separator in the small-sized dust collector gas tank and the air source triplet should be drained once every shift, and the oil-water separator should be cleaned every 3 to 6 months. The oil mister should always check the oil storage and refuel in time.
How to do the daily maintenance of small dust collector?
When the small dust collector is stopped, after the process system is stopped, the dust collector and exhaust fan should be kept working for a period of time to remove moisture and dust in the dust removal equipment.It must be noted that when the dust collector stops working, it must be repeatedly The dust collector is used for dust removal (manual dust removal can be used) to remove the dust on the dust filter bag to prevent the paste from being affected by moisture. When the machine is stopped, it is not necessary to cut off the compressed air source, especially when the fan is working, it must be lifted to the poppet valve. The cylinder provides compressed air to ensure that the poppet valve is open.
If the electromagnetic pulse valve fails, it should be removed in time.If there are impurities and moisture inside, it should be cleaned up.If the diaphragm is damaged, it should be replaced in time.
The small dust collector uses a timing type dust cleaning controller, which should periodically determine whether the dust cleaning cycle is accurate, otherwise it should be adjusted. With a constant resistance pulse controller, the working condition of the pressure switch should be regularly checked, and whether the pressure measurement port is blocked, and Clean it up.
The small dust collector periodically measures the process parameters, such as the flue gas volume, temperature, and concentration.If abnormalities are found, the cause should be found and dealt with in a timely manner.
When the small dust collector is turned on, the compressed air should be connected to the air storage tank first, the control power should be connected, and the ash discharge device should be started.If there are other equipment in the system, the downstream equipment should be started first.
Related Information